snag your way to bigger sale; make sure you sort out all those little defects before you put your house on the market.

If you\'re going to sell your house, it\'s time to fix all the flaws you \'ve been trying to ignore.
You know what I mean.
You are used to the little Missing skirting or broken kitchen door handle that opens from its side.
These small flaws can be fatal when selling your house.
The first thing you need to do is walk around each room and you will have a list of jobs in half an hour.
Use your common sense to see your home through the eyes of potential buyers.
There are many things you can do to add value.
The most important thing is to clean up the debris.
You will be surprised that you will get a few pounds on ebay or car trunk sales.
Clean the whole house, especially the bathroom and kitchen.
The living room is a key room, so a lot of effort was made there.
The children\'s bedroom looks like it\'s supposed to live in, so don\'t get angry inside, but the master bedroom is important.
If you have a budget, the master bedroom is the most important room after the living room. Large-
For example, if you sell your house, but replace broken roof tiles, then there is no point in large-scale work, pointing out that roof tiles, especially cleaning the ditch, must be done, it\'s also very simple.
If access is a problem your local roofing worker will overhaul your roof and clear the sewer for a few hundred pounds, a huge element of the house that is negatively mentioned in the home report.
You will also need to consider your home report, which can provide as much information as possible about the condition of the home for potential buyers.
The age of the House will affect your report.
The old property will reflect the period of their construction and you can only do that for that.
Energy costs and the carbon footprint of your house are two big problems. EPC (
Certificate of energy performance)
Reveal how your family is doing.
Insulation will be a factor in the old performance, especially the performance designed around the coal fire.
The thermal insulation of modern homes is very good, which is not a problem, but keep in mind that agin always has two sides.
The advantage of the old property is that the rooms and gardens are larger and the location is usually better.
All you can do is let potential buyers see themselves living there.
Donnie\'s little helper.
The electric roll clamp is the trick to stripping the wire, and when you use the scissors you may find that you are cutting the copper wire.
It was at this time that crimpingpliers came in handy.
They have threaded holes to remove the insulation material from the copper line.
This week\'s product: 3m respirator is important to use the correct respirator at work.
3m make a series of respirator for each job, basically the FFP1 for manual grinding and low grinding
The horizontal dust of FFP3 provides a high level of protection and is ideally used to lay the attic insulation and paint smoke.
The problem of water mess on marble countertops how to remove water/glass ring marks from marble countertops?
A. You can buy marble cleaners from most tile and fireplace retailers.
There is a range of products for the Cosmo ceramic Lithofin.
Once the binding marks have been cleared, it is important to seal them so as to prevent future staining.
Water test-
A drop of water on the surface of the marble, if absorbed in a few seconds, then the marble needs to be sealed.
QI has a laminate floor in my living room all the way to my dining area.
I want the carpet in the living room.
Can this be put on top?
I want to put that floor in the dining area.
Also, if it had to show up, would the flooring company be able to do that?
A. If you have to open the door of the plane to accommodate the extra carpet thickness on the floor, the main problem will appear.
If that\'s the case, I\'ll bring the laminate up.
It\'s really easy, you can do it yourself.
Once you lift the first board, the rest is separated.
Q: Should we paint the concrete roof tiles?
A company will power them, cement point ridges, verges and hips, replace brokentiles and provide 10-
Annual guarantee of 3448.
A. To keep the roof water tight, all you need to do is use the cement tips of the ridge, verges and hips and replace the broken tiles.
The cement tiles will last for a long time and the roof cover/coating is entirely up to you.
When painting the roof, just think about it, if you encounter broken tilein in the future, how do you match it with the roof coating?
Q: Our shower screen has been tiled in a place connected to the wall.
How can I remove two brackets without damaging the tiles? A You can\'t.
If the side of the frame supporting the door is fixed to the wall, then the tiles must fall off.
If you can still get the tiles, please get an angle grinder on the grouting line so that the adjacent tiles will not be damaged.
We had a converted loft with loft space on both sides of the upstairs room.
There are vents every meter on both sides of the house, so it\'s cold.
I\'m insulating the attic.
Should some of them be blocked or left behind?
A keep them as they are.
They are there to prevent condensation, it is a common mistake to lock the eaves or vents when insulating.
Concentrate on insulating the walls of the room between the attic and the ceiling beam.
QA candles are dripping with wax on one of my decorations.
Can I get off the bus?
Stick it in the fridge for an hour until the wax falls off easily.
Use sharp wooden utensils like toothpicks behind the wax.
Step by step guide. .
The purpose of this DIY work is to replace an existing roof window with cracks.
Like in the bathroom, there is condensation on the glass, which causes the window frame to be heavily contaminated with mold.
The swap with the Fakro roof windows solved all of these problems.
Fakro has considered every conceivable feature required for the aroof window and developed one accordingly.
They are excellent in building quality with tough glass designed to stop thieves.
The problem was solved because the window had an automatic ventilation window frame.
The use of Fakro windows 1 is energy efficient. 4 Uvalue. This is a two-
Work, guys.
1 Remove the old window by removing the flash and undo the brackets that hold the window in place.
Then carry out the old window.
2 Remove the package from the new window, then remove the window from the frame by pressing the release button on the center pivot bracket.
3 attach the fixing bracket to the frame and pass it on to the roof.
Place the bracket on the tile baton to level and secure the window.
4 Once the frame is fixed, put the glass back into the frame by inserting the male part of the bracket on the glass into the female part on the frame.
Now I need to make the window water.
Tighten by fixing the flash around the frame.
Make sure you have the right flash.
Install the Bottom Flash first.
6 Side fixed side flash, fixed to tile Batten with supplied clip.
The top Flash is installed at the end and interlocked with sideflash to ensure a waterproof seal.
Once the flash is installed, the roof tiles or slabs are fixed back to the roof.
9 Finally, there is an asphalt tape flashing at the bottom, glued to the roof tile to prevent any lifting of the wind to the flash.